76. A Comprehensive Review of Recent Progresses in Medium Manganese Steel, Journal of Materials Science, in revision (2025).
75. Exploring the Role of Process Gas-Assisted Surface Modifications of Zn-Mg-Al Alloy Coatings via Atmospheric Pressure Plasma Treatment for Enhanced Adhesive Performance, Journal of Materials Processing Technology, in revision (2025).
74. A Systematic Review on the Impact Behavior of Thermomechanically Processed Medium Manganese Steel, Steel Research International, In revision (2025).
73. Effect of Ni Addition on Heat Resistance, Corrosion Resistance, and Hydrogen Embrittlement of Al-Si coated Hot-Pressed Steels, Surface and Coating Technology
, In revision (2025).
72. Influence of strain rate on the tensile properties, misorientation distribution, and texture evolution of automotive-grade TRIP-assisted advanced high-strength steel, Materials Letters, 378, 137612 (2025).
71. Effect of Cooling Rate on Microstructure, Phases, and Properties of Al-Si Coated Hot-Press-Forming Steel Sheets, Materials Transactions, 66, 38 (2025).
70. Evaluating the Tribological Properties and Residual Stress of TiCrN Thin Films Deposited by Cathodic-Arc Physical Vapor Deposition Technique, Applied Sciences, 15, 2466 (2025).
69. Corrosion behavior of Zn, Zn-Mg-Al, and Al-Si alloy coated steel sheet in a simulated marine environment, Journal of Advanced Marine Engineering and Technology, 48, 302 (2024).
68. Adhesion strength improvement of thermally sprayed metallic coating on carbon-fiber-reinforced polymer composite, Materials Today Communications 41, 110619 (2024).
67. The Impact of Annealing Temperature and Time on the Grain Distribution and Texture Evolution of Cold-Rolled Electric-Furnace Annealed Low-Carbon Steel, Materials Letters, 371, 136955 (2024).
66. A Systematic Review on the Impact Behavior of Thermomechanically Processed Medium Manganese Steel, Materials Today Communications, In revision (2024).
65. Intercritically Annealed Medium-Manganese Steel: Insights into Microstructural and Microtextural Evolution, Strain Distribution, and Grain Boundary Characteristics, Materials 17, 2757 (2024).
64. Effects of Si Addition on Interfacial Microstructure and Corrosion Resistance of Hot-Dip Zn–Al–Mg–Si Alloy-Coated Steel, Crystals 14, 294 (2024).
63. Recrystallization kinetics and the mechanical properties of low-carbon steel during high-temperature annealing in electric furnace, Journal of Advanced Marine Engineering and Technology 48, 9 (2024).
62. In-situ wettability analysis of the effect of Al coating on the advanced high-strength steels, Arch. Metall. Mater. 69, 73 (2023).
61. Effects of Cr additions on Corrosion and Erosion-Corrosion Behaviors in the Weld Heat-Affected Zone of Hadfield Steel in Brine Environments, Korean J. Met. Mater. 61, 883-895 (2023).
60. Influence of calcium on the morphology and corrosion performance of hot-dip Al–Si coatings, Mater. Lett. 353, 135278 (2023).
59. Improved thermal stability of Al-Si alloy coated steel sheet with Cr thin film deposition, Arch. Metall. Mater. 69, 117 (2023).
58. Effects of the Mg Content on Microstructural and Corrosion Characteristics of Hot-Dip Al–Si–Mg Alloy-Coated Steel Sheets, Materials 16(17), 5827 (2023).
57. Functionalized Graphene Nanofiber-Incorporated Fumion Anion-Exchange Membranes with Enhanced Alkaline Stability and Fuel-Cell Performances, ACS Appl. Energy Mater. 14, 7702-7713 (2023).
56. Effect of Atmospheric-Pressure Gas-Plasma Treatment on Surface Properties of Hot-Dip Zn-Mg-Al Alloy-Coated Steel, Arch. Metall. Mater. 68, 187-190 (2023).
55. Effects of Applied Cathodic Current on Hydrogen Infusion, Embrittlement, and Corrosion-Induced Hydrogen Embrittlement Behaviors of Ultra-High Strength Steel for Automotive Applications, Korean J. Met. Mater. 61, 145-156 (2023).
54. Improving the Coatability of Zn–Mg–Al Alloy on Steel Substrate by the Surface Pretreatment of SnCl2-Added Zinc Ammonium Chloride, Appl. Sci. 13, 950 (2023).
53. Improvement of Weldability of Hot-Dip Galvanized Steel by Anti-Galvanizing Coating with Si-Fe-Al Oxide-Based Micropowder, Arch. Metall. Mater. 68, 155-159 (2023).
52. Simultaneous improvement of power density and durability of sulfonated poly(ether ether ketone) membrane by embedding CeO2-ATiO2: A comprehensive study in low humidity proton exchange membrane fuel cells, Int. J. Energy Res. 46, 9041-9057 (2022).
51. Effect of Flux Chloride Composition on Microstructure and Coating Properties of Zn-Mg-Al Ternary Alloy Coated Steel Product, Korean J. Met. Mater. 31, 704-709 (2021).
50. Enhanced Long-Term Reliability of Seal DeltaSpot Welded Dissimilar Joint between 6061 Aluminum Alloy and Galvannealed Steel via Excimer Laser Irradiation, Materials, 14, 6756 (2021).
49. Mechanical properties and microstructural characteristics of non-equiatomic high entropy alloy FeMnCoCrC prepared by powder metallurgy, Powder Metall. 64, 180-184 (2021).
48. Effect of Sintering Holding Time and Cooling Rate on the Austenite Stability and Mechanical Properties of Nanocrystalline FeCrC Alloy, Arch. Metall. Mater. 66, 759-763 (2021).
47. Microstructure and Mechanical Properties of Ni–Cr–Y2O3 Alloy Sintered Powder Composed of Oxide-Embedded Metallic Particles, Korean J. Met. Mater. 58, 843-851 (2020).
46. Evaluation of Tensile Shear Strength under Salt Spray Test on Dissimilar Metal Spot Welding of Aluminum Alloy and Galvannealed Steel Sheet, Appl. Sci. 10, 8116 (2020).
45. Corrosion Behaviors of the Eutectic Structure in Zn-Al-Mg Alloy Coated Steel inChloride Containing Aqueous Environment, Korean J. Met. Mater. 58, 610-616 (2020).
44. Effects of Sn content and hot deformation on microstructure andmechanical properties of binary high Sn content Cu–Sn alloys, Mater. Sci. Eng. A 796, 140054 (2020).
43. Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product, Korean J. Met. Mater. 58, 169-174 (2020).
42. Mechanistic study on the cut-edge corrosion behaviors of Zn-Al-Mg alloy coated steel sheets in chloride containing environments, Corros. Sci. 160, 1-9 (2019).
41. Effect of Ni and Cu Addition on Corrosion Behaviors of Pre-Oxidized Ultra-Strong Steel for Automotive Applications, Korean J. Met. Mater. 57, 343-351 (2019).
40. Synthesis of GNS-MnS hybrid nanocomposite for enhanced electrochemical energy storage applications, Mater. Chem. Phys. 230, 249-257 (2019).
39. Improved Structural and Electrical Properties of ZnO-Based Thin Film Transistors by Using Pulsed KrF Excimer Laser Irradiation, J. Electron. Mater. 48, 3137-3144 (2019).
38. Effect of of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting, Korean J. Met. Mater. 56, 805-812 (2018).
37. The Improvement of Electrical Characteristics of Pt/Ti Ohmic Contacts to Ga-Doped ZnO by Homogenized KrF Pulsed Excimer Laser Treatment, J. Electron. Mater. 47, 2257-2262 (2018).
36. Improving the Characteristics of Sn-doped In2O2 Grown at Room Temperature with Oxygen Radical-Assisted Electron Beam Deposition, J. Korean Phys. Soc. 71, 101-106 (2017)
35. The improvement of electrical characteristics of Pt/Ti ohmic contacts to Ga-doped ZnO by homogenized KrF pulsed excimer laser treatment, J. Electron. Mater. 47, 2257-2262 (2017).
34. Effect of metallurgical factors on the pitting corrosion behavior of super austenitic stainless steel weld in an acidic chloride environment, J. Mater. Res. 32, 1343-1350 (2017).
33. Carbon conductor- and binder-free organic electrode for flexibleorganic rechargeable batteries with high energy density, J. Power Sources, 361, 15-20 (2017).
32. Electrochemical properties of LiMn0.4Fe0.6PO4 with polyimide-based gel polymer electrolyte for high safety and improvement of rate capability, Electrochimica Acta 238, 107–111 (2017).
31. Hydrogen incorporation effect in phosphorus doped p-type ZnO thin films grown by radiofrequency magnetron sputtering, RSC Advances, 7, 16119-16125 (2017).
30. Effect of bainite in microstructure on hydrogen diffusion and trapping behavior of ferritic steel used for sour service application, Journal of Materials Research, 32, 1295-1303 (2017).
29. The addition of cerium and yttrium to ferritic steel weld metal to improve hydrogen trapping efficiency, International Journal of Minerals Metallurgy and Materials, 24, 415-422 (2017).
28. Effect of metallurgical factors on the pitting corrosion behavior of super austenitic stainless steel weld in an acidic chloride environment, Journal of Materials Research, 32, 1343-1350 (2016).
27. Surface and Cut-edge Corrosion Behavior of Zn-Mg-Al Alloy-Coated Steel Sheets as a Function of the Alloy Coating Microstructure, Metals and Materials International, Vol.22, No.1, 26-33 (2016).
26. Rapid-melt-mediated recrystallization of ZnO thin films grown at low temperature by using KrF excimer laser irradiation, Journal of the Korean Physical Society, Vol.67, Issue 10, 1778-1782 (2015).
25. Rapid, facile, and eco-friendly reduction of graphene oxide by electron beam irradiation in an alcohol–water solution, Materials Letters, Vol.126, 151-153 (2014).
24. Aluminum-Doped Zinc Oxide Anode for Organic Light Emitting Diodes Grown by Pulsed Laser Deposition Using Plasma-Enhanced Oxygen Radicals, Journal of Nanoelectronics and Optoelectronics, Volume 9, Number 2, 162-166(5) (2014).
23. Preparation and characterization of the As40Se60 and As38.8Se61.2 glasses with high quality for the single mode IR glass fiber, Optical Fiber Technology, Vol.21, 176-179 (2014).
22. Direct patterning of poly(acrylic acid) on polymer surfaces by ion beam lithography for the controlled adhesion of mammalian cells, Biotechnology Letters, Vol.36, Issue 102135-2142 (2014).
21. Enhanced Performance of GaN-Based Green Light-Emitting Diodes with Gallium-Doped ZnO Transparent Conducting Oxide, Journal of Electronic Materials, Vol.43, No.41232-1236 (2014).
20. Improved Light Extraction of GaN-based Green Light- Emitting Diodes with an ZnO Nanorod arrays, Electrochem. Sol-State Lett. 14(3), H120 (2010).
19. Resistive switching characteristics of Al/PCMO for non-volatile memory applications, IEEE Electron Device Lett., vol. 30, no. 9, 919 (2009).
18. Improvement of electrostatic discharge characteristics and optical output power of GaN-based light-emitting diodes by plasma discharge cell, IEEE Electron Device Lett., vol. 30, no. 9, 937 (2009).
17. Ring Oscillator Circuit Based on ZnO Thin-film Transistors Fabricated by RF Magnetron Sputtering, J. Korean Phys. Soc. 55, 1514 (2009).
16. Growth of characterization of Gallium-doped ZnO films for a-particle scintillators, J. Electrochem. Soc. 155, H909 (2008).
15. Improvement of characteristics of Ga-doped ZnO grown by plasma-enhanced pulsed laser deposition, J. Electrochem. Soc. 155, D599 (2008).
14. Effect of pressure on the properties of phosphorus-doped p-type ZnO thin films grown by radio frequency-magnetron sputtering, Appl. Phys. Lett. 92, 161109 (2008).
13. Microstructural properties of P-doped p-type ZnO grown by RF-magnetron sputtering, Appl. Phys. Lett. 93, 111905 (2008).
12. Effect of annealing temperature and ambient gas on phosphorus doped p-type ZnO, Appl. Phys. Lett. 90, 021106 (2007).
11. ZnO thin films and light-emitting diodes (Part for metal contacts and plasma etching), J. Phys. D: Appl.Phys. 40 R387–R412 (2007).
10. Improvement of Pt Schottky contacts to n-type ZnO by KrF excimer laser irradiation, Appl. Phys. Lett. 91, 042109 (2007).
9. Current driven hydrogen incorporation in zinc oxide, Appl. Phys. Lett. 91, 212102 (2007).
8. ZnO-based light-emitting metal-insulator-semiconductor diodes, Appl. Phys. Lett. 91, 121113 (2007).
7. Formation of low resistance nonalloyed ohmic contacts to p-type GaN by KrF laser irradiation, Phys. Stat. Solid. 3, 1717 (2006).
6. Improvement of a green LED by the growth of p-GaN on In0.25GaN/GaN MQWs at a low temperature, J. Crystal Growth 289, 107-112 (2006).
5. Type conversion of intentionally undoped ZnO layers grown by pulsed laser deposition, Superlattices and microstructures 39, 130 (2006).
4. Electrical properties of nonalloyed Ni/Au ohmic contacts to laser-irradiated p-GaN, J Mater Sci: Mater Electron 17, 831 (2006).
3. Low resistance nonalloyed Ni/Au ohmic contacts to p-GaN irradiated by KrF excimer laser, Appl. Phys. Lett. 89, 042107 (2006).
2. Formation of low resistance nonalloyed Ti/Au ohmic contacts to n-type ZnO by KrF excimer laser irradiation, Electrochem. Sol-State Lett. 8, G317 (2005).
1. Growth of nominally undoped p-type ZnO by pulsed-laser deposition, Appl. Phys. Lett. 87, 122103 (2005).
55. Effects of Applied Cathodic Current on Hydrogen Infusion, Embrittlement, and Corrosion-Induced Hydrogen Embrittlement Behaviors of Ultra-High Strength Steel for Automotive Applications, Korean J. Met. Mater. 61, 145-156 (2023).
54. Improving the Coatability of Zn–Mg–Al Alloy on Steel Substrate by the Surface Pretreatment of SnCl2-Added Zinc Ammonium Chloride, Appl. Sci. 13, 950 (2023).
53. Improvement of Weldability of Hot-Dip Galvanized Steel by Anti-Galvanizing Coating with Si-Fe-Al Oxide-Based Micropowder, Arch. Metall. Mater. 68, 155-159 (2023).
52. Simultaneous improvement of power density and durability of sulfonated poly(ether ether ketone) membrane by embedding CeO2-ATiO2: A comprehensive study in low humidity proton exchange membrane fuel cells, Int. J. Energy Res. 46, 9041-9057 (2022).
51. Effect of Flux Chloride Composition on Microstructure and Coating Properties of Zn-Mg-Al Ternary Alloy Coated Steel Product, Korean J. Met. Mater. 31, 704-709 (2021).
50. Enhanced Long-Term Reliability of Seal DeltaSpot Welded Dissimilar Joint between 6061 Aluminum Alloy and Galvannealed Steel via Excimer Laser Irradiation, Materials, 14, 6756 (2021).
49. Mechanical properties and microstructural characteristics of non-equiatomic high entropy alloy FeMnCoCrC prepared by powder metallurgy, Powder Metall. 64, 180-184 (2021).
48. Effect of Sintering Holding Time and Cooling Rate on the Austenite Stability and Mechanical Properties of Nanocrystalline FeCrC Alloy, Arch. Metall. Mater. 66, 759-763 (2021).
47. Microstructure and Mechanical Properties of Ni–Cr–Y2O3 Alloy Sintered Powder Composed of Oxide-Embedded Metallic Particles, Korean J. Met. Mater. 58, 843-851 (2020).
46. Evaluation of Tensile Shear Strength under Salt Spray Test on Dissimilar Metal Spot Welding of Aluminum Alloy and Galvannealed Steel Sheet, Appl. Sci. 10, 8116 (2020).
45. Corrosion Behaviors of the Eutectic Structure in Zn-Al-Mg Alloy Coated Steel inChloride Containing Aqueous Environment, Korean J. Met. Mater. 58, 610-616 (2020).
44. Effects of Sn content and hot deformation on microstructure andmechanical properties of binary high Sn content Cu–Sn alloys, Mater. Sci. Eng. A 796, 140054 (2020).
43. Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product, Korean J. Met. Mater. 58, 169-174 (2020).
42. Mechanistic study on the cut-edge corrosion behaviors of Zn-Al-Mg alloy coated steel sheets in chloride containing environments, Corros. Sci. 160, 1-9 (2019).
41. Effect of Ni and Cu Addition on Corrosion Behaviors of Pre-Oxidized Ultra-Strong Steel for Automotive Applications, Korean J. Met. Mater. 57, 343-351 (2019).
40. Synthesis of GNS-MnS hybrid nanocomposite for enhanced electrochemical energy storage applications, Mater. Chem. Phys. 230, 249-257 (2019).
39. Improved Structural and Electrical Properties of ZnO-Based Thin Film Transistors by Using Pulsed KrF Excimer Laser Irradiation, J. Electron. Mater. 48, 3137-3144 (2019).
38. Effect of of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting, Korean J. Met. Mater. 56, 805-812 (2018).
37. The Improvement of Electrical Characteristics of Pt/Ti Ohmic Contacts to Ga-Doped ZnO by Homogenized KrF Pulsed Excimer Laser Treatment, J. Electron. Mater. 47, 2257-2262 (2018).
36. Improving the Characteristics of Sn-doped In2O2 Grown at Room Temperature with Oxygen Radical-Assisted Electron Beam Deposition, J. Korean Phys. Soc. 71, 101-106 (2017)
35. The improvement of electrical characteristics of Pt/Ti ohmic contacts to Ga-doped ZnO by homogenized KrF pulsed excimer laser treatment, J. Electron. Mater. 47, 2257-2262 (2017).
34. Effect of metallurgical factors on the pitting corrosion behavior of super austenitic stainless steel weld in an acidic chloride environment, J. Mater. Res. 32, 1343-1350 (2017).
33. Carbon conductor- and binder-free organic electrode for flexibleorganic rechargeable batteries with high energy density, J. Power Sources, 361, 15-20 (2017).
32. Electrochemical properties of LiMn0.4Fe0.6PO4 with polyimide-based gel polymer electrolyte for high safety and improvement of rate capability, Electrochimica Acta 238, 107–111 (2017).
31. Hydrogen incorporation effect in phosphorus doped p-type ZnO thin films grown by radiofrequency magnetron sputtering, RSC Advances, 7, 16119-16125 (2017).
30. Effect of bainite in microstructure on hydrogen diffusion and trapping behavior of ferritic steel used for sour service application, Journal of Materials Research, 32, 1295-1303 (2017).
29. The addition of cerium and yttrium to ferritic steel weld metal to improve hydrogen trapping efficiency, International Journal of Minerals Metallurgy and Materials, 24, 415-422 (2017).
28. Effect of metallurgical factors on the pitting corrosion behavior of super austenitic stainless steel weld in an acidic chloride environment, Journal of Materials Research, 32, 1343-1350 (2016).
27. Surface and Cut-edge Corrosion Behavior of Zn-Mg-Al Alloy-Coated Steel Sheets as a Function of the Alloy Coating Microstructure, Metals and Materials International, Vol.22, No.1, 26-33 (2016).
26. Rapid-melt-mediated recrystallization of ZnO thin films grown at low temperature by using KrF excimer laser irradiation, Journal of the Korean Physical Society, Vol.67, Issue 10, 1778-1782 (2015).
25. Rapid, facile, and eco-friendly reduction of graphene oxide by electron beam irradiation in an alcohol–water solution, Materials Letters, Vol.126, 151-153 (2014).
24. Aluminum-Doped Zinc Oxide Anode for Organic Light Emitting Diodes Grown by Pulsed Laser Deposition Using Plasma-Enhanced Oxygen Radicals, Journal of Nanoelectronics and Optoelectronics, Volume 9, Number 2, 162-166(5) (2014).
23. Preparation and characterization of the As40Se60 and As38.8Se61.2 glasses with high quality for the single mode IR glass fiber, Optical Fiber Technology, Vol.21, 176-179 (2014).
22. Direct patterning of poly(acrylic acid) on polymer surfaces by ion beam lithography for the controlled adhesion of mammalian cells, Biotechnology Letters, Vol.36, Issue 102135-2142 (2014).
21. Enhanced Performance of GaN-Based Green Light-Emitting Diodes with Gallium-Doped ZnO Transparent Conducting Oxide, Journal of Electronic Materials, Vol.43, No.41232-1236 (2014).
20. Improved Light Extraction of GaN-based Green Light- Emitting Diodes with an ZnO Nanorod arrays, Electrochem. Sol-State Lett. 14(3), H120 (2010).
19. Resistive switching characteristics of Al/PCMO for non-volatile memory applications, IEEE Electron Device Lett., vol. 30, no. 9, 919 (2009).
18. Improvement of electrostatic discharge characteristics and optical output power of GaN-based light-emitting diodes by plasma discharge cell, IEEE Electron Device Lett., vol. 30, no. 9, 937 (2009).
17. Ring Oscillator Circuit Based on ZnO Thin-film Transistors Fabricated by RF Magnetron Sputtering, J. Korean Phys. Soc. 55, 1514 (2009).
16. Growth of characterization of Gallium-doped ZnO films for a-particle scintillators, J. Electrochem. Soc. 155, H909 (2008).
15. Improvement of characteristics of Ga-doped ZnO grown by plasma-enhanced pulsed laser deposition, J. Electrochem. Soc. 155, D599 (2008).
14. Effect of pressure on the properties of phosphorus-doped p-type ZnO thin films grown by radio frequency-magnetron sputtering, Appl. Phys. Lett. 92, 161109 (2008).
13. Microstructural properties of P-doped p-type ZnO grown by RF-magnetron sputtering, Appl. Phys. Lett. 93, 111905 (2008).
12. Effect of annealing temperature and ambient gas on phosphorus doped p-type ZnO, Appl. Phys. Lett. 90, 021106 (2007).
11. ZnO thin films and light-emitting diodes (Part for metal contacts and plasma etching), J. Phys. D: Appl.Phys. 40 R387–R412 (2007).
10. Improvement of Pt Schottky contacts to n-type ZnO by KrF excimer laser irradiation, Appl. Phys. Lett. 91, 042109 (2007).
9. Current driven hydrogen incorporation in zinc oxide, Appl. Phys. Lett. 91, 212102 (2007).
8. ZnO-based light-emitting metal-insulator-semiconductor diodes, Appl. Phys. Lett. 91, 121113 (2007).
7. Formation of low resistance nonalloyed ohmic contacts to p-type GaN by KrF laser irradiation, Phys. Stat. Solid. 3, 1717 (2006).
6. Improvement of a green LED by the growth of p-GaN on In0.25GaN/GaN MQWs at a low temperature, J. Crystal Growth 289, 107-112 (2006).
5. Type conversion of intentionally undoped ZnO layers grown by pulsed laser deposition, Superlattices and microstructures 39, 130 (2006).
4. Electrical properties of nonalloyed Ni/Au ohmic contacts to laser-irradiated p-GaN, J Mater Sci: Mater Electron 17, 831 (2006).
3. Low resistance nonalloyed Ni/Au ohmic contacts to p-GaN irradiated by KrF excimer laser, Appl. Phys. Lett. 89, 042107 (2006).
2. Formation of low resistance nonalloyed Ti/Au ohmic contacts to n-type ZnO by KrF excimer laser irradiation, Electrochem. Sol-State Lett. 8, G317 (2005).
1. Growth of nominally undoped p-type ZnO by pulsed-laser deposition, Appl. Phys. Lett. 87, 122103 (2005).